Archives for posts with tag: waterdigte

SELF AMALGAMATING TAPES

 
 
SELF AMALGAMATING TAPES

A range of tapes which amalgamate (bond together) when applied under tension as an insulation wrap. They become a homogeneous, void-free mass without need for external heat or pressure.
The main applications are for high voltage electrical insulation, moisture proofing and corrosion prevention for telecommunication and other industrial uses.

The tapes are flexible and versatile in application. They can be easily applied by hand, contouring closely to irregular shapes and bends to form a permanent insulation layer or waterproofing barrier.

The life of the tapes exposed out of doors in the UK is expected to be several years. In enclosed locations, such as cables, the durability should be at least equal to that of the cables. Where tape may be subject to abrasion or exposure to weather an external covering with a high quality pPVC tape is recommended.

The most important tapes out of an extensive range are:

250l PIB Self Amalgamating Tape

For jointing/splicing and repair of a wide range of power and distribution cables up to 46kV. Used by postal and telecommunication authorities in conjunction with pPVC insulation tapes for making watertight seals, both above and below ground. Tapes can be applied for protection against corrosion on metal pipe work and waterproofing of electrical components.

2515/25l7 EPR Self Amalgamating Tape

For jointing/splicing and repair of a wide range of solid dielectrical power cables up to 69kV. Also used for insulating and waterproofing electrical components and connections at lower voltages. Can be used in conjunction with pPVC insulation tape.

 
2501
2515
2517
Base
Polyisobutylene
Ethylene Propylene Rubber (EPR)
Ethylene Propylene Rubber (EPR)
Colour
Black
Black
Black
Thickness
0.50mm
0.50mm
0.75mm
Elongation
600%
750%
800%
Dielectric Strength
(short time method)
40kv/mm
36kv/mm
36kv/mm
Temperature Range
-40 to +90 ° C
-40 to +90 ° C
-40 to +90 ° C
Short Term
100 ° C
130 ° C
130 ° C
Price / Dimensions
Upon Request
   
Availability
Upon Request
Upon Request
Upon Request

2547 EPR Self Amalgamating Tape

2547 is an insulating, self-amalgamating tape based on EPR (Ethylene Propylene Rubber). Its colour is black.

APPLICATIONS:

  • For jointing and repairing power cables up to 69 kV.
  • For insulation, waterproofing and protection of electrical connections (e.g. satellite ‘dish’).
  • For binding and sealing for the continuity of the lead sheath.

PRODUCT BENEFITS:

  • Excellent physical and electrical properties with a high degree of stability under conditions of use.
  • The tape amalgamates rapidly when applied under tension to provide a void-free homogeneous wrapping, without the need for external heat or pressure.
  • Excellent resistance to water, UV and ozone.
  • The tape will remove cleanly when cut, allowing it to be used as temporary insulation or protection.
  • The product is approved to EDF HN 26-S-04.
  • Meets specification UTE C 33-011.
  • Service temperature -40 °C to +100°. Overload temperature 120° C.
  • Supplied in an easy to handle and apply tape form. The product is interleaved with a disposable plastic liner.

TECHNICAL PROPERTIES:

 
Unit
Nominal Value
Test Method
Thickness
mm
0.75)
 
Tensile Strength
MPa
3
BS 903
Elongation at Break
%
> 550
BS 903
Volume Resistivity
Ohm.m
1 x 10 ¹3
ASTM D257
Dielectric Strength
(short time method)
kV/mm
44
ASTM D149
Dielectric Loss Angle
0.004
ASTM D149

STANDARD PRESENTATION:

  • Roll length: 3m, 5m, 7m, 9.1m, 10m
  • Roll width: 19mm, 25mm
  • Core: 38mm dense plastic
  • Packaging: Individually shrink-wrapped rolls

STANDARD PRESENTATION:
Care should be taken to avoid direct contact between the tape and petroleum-type solvents and oils. Oils may affect the electrical properties of the tape.
The rolls should be stored flat on their cut edges in the original packaging. The product must be protected from dust, heat, moisture, direct sunlight and solvent fumes. Storage temperature between +10°C and +30°C. Under these conditions, the storage life of the tape in a temperate climate will be at least five years.

 



Contact us by phone, fax, e-mail or , for any adhesive tape requirement

Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk

MASKING TAPES

 
 
MASKING TAPES

Ranging from General Purpose to Very High Temperature performance. Various adhesive types.
  Thickness (mm) Adhesion (n/25mm) Tensile
(n/25mm)
Temperature
(max.° C)
Masking – General Purpose
6010 0.125 12.5 87 60
Features: Impregnated medium creped paper with hot melt rubber resin adhesive. For general purpose masking/packaging.
Masking – Standard
Standard – 140 micron 0.140 +/- 0.010 > 9.0 89 80
Features: Choice of Orange, Light Yellow, Green and Red impregnated medium creped paper with hot melt rubber resin adhesive. Quick adhesive, easy to peel, no residual, easy to write on. Used for indoor decoration, painting masking, packing, bundling and enforcing, cleaning cotton fiber. We have ISO 9001:2000 and fit for European Union RoHs. Other colours are available upon request.
Masking – High Temperature
2556 0.180 7.5 90 30 min /150 °C
10 min /180 °C

Features: Impregnated lightly creped paper with thermally stable rubber resin adhesive. For high temperature masking.

Masking – Very High Temperature
2595 0.175 6 790 2 hrs/200 °C
3 cycles each – 30 mins at 180 °C
Features: Impregnated lightly creped paper with thermostable silicone based adhesive for very high temperature/multiple stoving.

 

Smooth Masking Paper Tape

Developed in variety of colours

(back saturated water proof),

Rubber solvent adhesive,

Packed to any requirements.



Contact us by phone, fax, e-mail or , for any adhesive tape requirement

Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk

0485 Rubber Resin Adhesive

 
0485 Rubber Resin Adhesive

General Description

A solvent free rubber resin based hot melt adhesive. 0485 is supplied in amber colour in a strip form on an easily removed liner.

Applications

 

  • Jointing of plastic sheeting, filter membranes, damp proof membranes etc.
  • Bonding lightweight insulation panels, kickplates etc.
  • Mounting lightweight trim.
  • Bonding of insulation walls.
  • Joining of plastic sheeting.
  • Fixing of edgings, sheeting, signs and tiles.
  • Fixing roof bars on commercial vehicles.
  • Fixing of carpets, decorative edging and board and trims.

Safety Data Sheet

 

Product Benefits

 

  • Clean, easy to use alternative to brush on adhesives.
  • Very aggressive pressure sensitive adhesive. Well established product with long term proven success.
  • Non-hardening and permanently flexible. Forms a strong waterproof bond.
  • Excellent strength bond, and no curing time required. Solvent free, therefore no fumes.
  • Ideal for uneven and difficult surfaces such as stucco, block walls and brickwork.
  • Pre-formed to a choice of sizes. Versatile “instant stick” adhesive on a roll.

Average Specifications

 

 
Specifications
Total Thickness
0.2, 0.4, 1.0, 2.0 mm
Specific Gravity
0.98 g/cm3
Softening Point
85 ° C
Cohesion
0.6mm Nmm2
Tack
(Roller Ball Method)
30mm
Operating Temperature
0 – 40 ° C (apply at 10 ° C and above)

0480 > The product can also be supplied in 4kg blocks for extrusion by customers, under our product code “0480“.



Contact us by phone, fax, e-mail or , for any adhesive tape requirement

Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk

DOUBLE SIDED TAPES

 
 
DOUBLE SIDED TAPES

(wide range for various mounting, bonding and splicing applications)

A wide range of tapes based on PVC, PP, Tissue, Polyester and Transfer, including extruded adhesives in roll form. The range covers all temperature requirements and includes Very High Bond Tapes, Fingerlift Tapes and Carpet Tapes.

  Product Number Thickness (mm) Adhesion (n/25mm) Temperature
(max.° C)
75 ° Centigrade
Double Sided Polypropelene /Hot Melt 2057 0.080 31 75
Double Sided Tissue /Hot Melt 2012 0.090 31

75

100 ° Centigrade plus
Double Sided Cellulose Red 4448 0.085 11

130

Polypropelene Acylic 3557 0.070 16

100

Double Sided Polypropelene/mod. Acrylic 3057 0.070 24

100

Double Sided Tissue. Acrylic 3512 0.080 24

120

Double Sided Polyester Acrylic 3554 0.070 16 130
150 ° Centigrade plus
Double Sided Transfer Acrylic 4450 0.040 6.5 180
Transfer Tapes for ATS Tape Gun Dispenser
Double Sided Transfer Acrylic

£3.60 per roll
12mm x 33m
72 Rolls per Case
> 1 case
Including Delivery + VAT
in stock

 

4456 0.040 6.5 180
Double Sided Acrylic – Removable 4406 0.025 6.5/2.0 150
Transfer Tape Gun for 12/19mm x 33m rolls on 25mm core
Double Tapes for Very High Bond
Rubber Resin Adhesive Bonding 0485 0.4 200 40
Rubber Resin Adhesive Bonding 0485 1 200 40
Rubber Resin Adhesive Bonding 0485 2 200 40
Features: Excellent for polyethylene and rubber bonding, but no UV/plasticiser resistance. Can be supplied in bulk for extrusion
Double Sided Fingerlift Tapes – The following range of double sided tapes with an over-wide liner (for easy removal) is available:
Typical dimensions:

Tape width/Liner width: 6/12mm, 12/18mm, 24/30mm
Length: up to 2000m in flat rolls and 6000m plus as bobbins

Tissue – plain or printed (remove to expose adhesive) liner 2065 / 2665

Features: Supplied with a permanent adhesive, this product is used in the manufacturer of continuous stationery/business forms, and for the flaps of envelopes to make them self-adhesive. Being a thicker tape it is ideal for difficult surfaces. The tape can be supplied in flat rolls up to 1500m long and in bobbins (spools) of up to 6000m.

Transfer – plain or printed (remove to expose adhesive) liner 2034 / 2634

Features: Can be supplied in flat rolls or Spooled Bobbins. Typical dimensions (liner/tape widths in mm) 6/12, 12/18, 18/24, 24/30.A tape based on a permanent adhesive. Same applications as for 2065/2665, but the tape is thinner, which keeps continuous stationary less bulky. Can be supplied in flat rolls of up to 2000m or in longer bobbins.

D/S Transfer Tape – Clear Plastic Liner 2074

Features: The same as 2034/2634, but supplied with a plastic liner for application to plastic bags (to make them self-seal), with the advantage that during bag manufacture a hot wire can cut through both the plastic bag and the tape at the same time.

Carpet Tapes
Synthetic Textile Mesh (hand tear) 2058 0.240 31 75
Double Sided Airabin Carpet Tape 099 0.27 3 60

Features: A double sided self-adhesive cloth based tape which is flame resistant and self-extinguishing, supplied on a siliconised paper liner.For fixing carpets inside aircrafts which require the above properties.
Flame resistance: burn length: 120mm, extinction time: 3 seconds, no dripping.

As per FAR-25853-part 25-Change 25-35.
Adhesion tested according to: BOEING 5-133A
Flexible and easy tear, no adhesion residue after removal

SPLICING TAPES (Single sided)

For top or bottom side splicing refer to Single Sided Tapes



Contact us by phone, fax, e-mail or , for any adhesive tape requirement

Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk