Archives for posts with tag: PVC

ALUMINIUM FOIL TAPES

 

 

ALUMINIUM FOIL TAPES

 

General Description :

A range of high quality aluminium foil tapes for a variety of insulation applications, most commonly used in the building and construction industry.
There is a choice of adhesives, either hot melt for maximum adhesion but limited temperature resistance, or pure acrylic with superior temperature performance. Some grades are supplied on a liner, others are available self-wound (without a liner).

Average Specification :

  1012 1312 1325
Aluminium Substrate
Adhesive Hot Melt Pure Acrylic Pure Acrylic
Thickness
– Foil
– Adhesive
– Total

0.030mm
0.035mm
0.065mm

0.030mm
0.030mm
0.060mm

0.040mm
0.025mm
0.065mm
Liner wound Yes Yes No – self
Adhesion 31N/25mm 24N/25mm 24N/25mm
Temp. Range (C) -10 / +60 -20 / +120 -20 / +130
Availability upon order upon order in stock

 

FSK (Foil Scrim Kraft) Tape

General Description:

 

A reinforced aluminium foil tape.

The tape is based on a 7 micron aluminium foil, reinforced with a 3 way fibreglass scrim kraft, and with a water based acrylic adhesive. It is a self-adhesive tape.

Applications:

Used for sealing joints and seams against moisture and vapour on foil jacketing insulation

Average Specifications:

  Specifications
Aluminium Foil Substrate 7 microns
Fibreglass Scrim Kraft
Waterbased Acrylic Adhesive Yes
Release Paper 60 g/m2
Total Thickness 140 microns
Peel Adhesion 14 N/25mm width
Roller Tack 0.1N/25mm width

HS Code:76.07.20.00



Contact us by phone, fax, e-mail or , for any adhesive tape requirement

Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk

 
ALUMINIUM FOIL TAPES

General Description :

A range of high quality aluminium foil tapes for a variety of insulation applications, most commonly used in the building and construction industry.
There is a choice of adhesives, either hot melt for maximum adhesion but limited temperature resistance, or pure acrylic with superior temperature performance. Some grades are supplied on a liner, others are available self-wound (without a liner).

Average Specification :

  1012 1312 1325
Aluminium Substrate
Adhesive Hot Melt Pure Acrylic Pure Acrylic
Thickness
– Foil
– Adhesive
– Total

0.030mm
0.035mm
0.065mm

0.030mm
0.030mm
0.060mm

0.040mm
0.025mm
0.065mm
Liner wound Yes Yes No – self
Adhesion 31N/25mm 24N/25mm 24N/25mm
Temp. Range (C) -10 / +60 -20 / +120

PTFE SELF-ADHESIVE TAPE

 
PTFE SELF-ADHESIVE TAPE

A PTFE Tape coated with an aggressive Silicone-Acrylic adhesive designed for various applications in the printing, coating and extruding industries.

Average Specifications:

Substrate PTFE
Adhesive Aggressive Silicone-Acrylic
Thickness

  • Substrate
  • Adhesive
  • Total

0.051 mm
0.038 mm
0.089 mm
Tensile Strength 50 N/mm2
Elongation 100%
Peel Adhesion 4 N/cm
Dielectric Strength 9.000 Total Volts
Service Temperature -73 / +260 ° C
Availability in stock
 

An alternative with a substrate thickness of 0.127mm is available as special manufacture.

Applications:

PTFE tape is used to repel unwanted material and substances and therefore has high release characteristics with exceptional temperature performance. It is used in:

  • Nip Roller Wrap for Polyethylene and Polypropylene coaters.
  • Doctor Blade Coater (helps preventing a build-up of contaminates in the Print and Coating industries).
  • Seamless Belt Manufacture.
  • Plastic Extruder Heads (helps preventing costly maintenance due to build-up of extruded waste).

Sizes Available:

50mm x 33m ex stock. Other widths to order.



Contact us by phone, fax, e-mail or , for any adhesive tape requirement

Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk

SPECIAL PURPOSE TAPES

 
SPECIAL PURPOSE TAPES
A wide range of specialised tapes for use in a variety of industries and applications.

Product & Features Thickness (mm) TOTAL Thickness (mm) BASE Adhesion (N/25mm) Tensile (N/25mm) Service Temperature
(min – max.° C)
Availability
Aluminium Foil
1012 30my Foil/Hot Melt with Liner 0.065 0.030 31   -15 / +75 upon order
1312 30my Foil/Acrylic with Liner 0.060 0.030 24   -20 / +130 upon order
1325 40my Foil/Acrylic self-wound 0.065 0.040 24   -20 / +130 upon order
Features: A range of high quality aluminium foil Tapes for a variety of insulation applications..
Metallised Polyester
1695metallised polyester 0.045   6.5 150 -15 / +130 upon order
Features: Based on a Polyester film coated with a long ageing acrylic adhesive. Tape surface has been silver metallised. Use: Double Glazing seal, Mirror backing, Reflective backings. Also available in Red and Gold.
Anti-Dust
4844 anti-dust 0.350   24   -30 / +80 upon order
Features: The tape consist of a strong fleece material with a plastic top coat on one side and a durable acrylic adhesive on the other. Along the tape are central perforations covered by a non-woven filter. The filter is impregnated with an anti-mould and anti-algae agent.
Anti-Dust Tape is designed to seal the edges of multi-walled polycarbonate sheeting. Sealing against excessive dust and insects, the filter sections permit flow of air and moisture to reduce condensation.
Silicone Rubber / Fabric
2420 Napped tape surface 0.660   15 200 80 ° C short term in stock
2421 Smooth tape surface 0.400   15 200 50 ° C long term in stock
Features: These tapes are based on a silicone rubber coated rayon fabric to which has been applied a synthetic rubber adhesive. One grade has a napped (pimpled) surface and the other is smooth. The tape surfaces are highly resistant to clogging and prevent build-up of adhesive or other deposits on web transport rollers. They are ideal for wrapping over transport rollers as used in the converting industries. The surfaces have extremely low friction to prevent stretching or sticking.
pPVC Lane Marking / Hazard Warning
2721 marking/warning 0.18   7 87 80 upon order
Features: Based on a heavy duty film coated with a white aggressive adhesive. Used for marking out lanes on factory floors or warning against hazards. Colours: Black, White, Yellow, Blue, Green, Red. As a hazard tape: Black/Yellow, Red/White, Green/White.
Book Binding Tape
5550-62 book binding tape 0.25   6 71 70 upon order
Features: A self-adhesive paper tape, based on an embossed, siliconised, self-coloured kraft paper. Available in Black, Green, Dark Blue, Light Blue, White, Red and Yellow. It is widely used for binding the spine of cheque books, accounts books, brochures etc. The tape has an attractive embossed appearance, unwinds easily from the roll and is provided with a high tack aggressive adhesive.
Pipeline Identification
Features: Based on a 2-ply laminated tape structure. The printing is on a PVC tape which is laminated over with a very clear PP tape for protection and durability. The printing will either be in basic identification colours or with symbols. The use is for application to pipe lines in order to indicate what these pipes contain and the direction of the flow of the content. Rolls are supplied in 33m length and are available in varying widths.
Anti Hot-Spot Foam
Features: Based on a low density white foam tape coated with a long aging acrylic adhesive. The foam tape surface has a fixed polyester liner applied. Excellent UV resistance is offered and the tape has a life expectancy of about 20 years. The application is in the horticultural industry to prolong the life of plastic film or net covers which are applied over the frames in temporary greenhouses. The tape is applied to aluminium frames prior to the covering with plastic sheets or netting. The tape acts as an insulation layer reducing heat transmission and preventing the build-up of hot spots. The polyester liner on the tape surface prevents friction and abrasion of the plastic covers. The tape is usually supplied in 9 or l0mm widths


Contact us by phone, fax, e-mail or , for any adhesive tape requirement

Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk

Anti-Counterfeit Tape

 

Anti-Counterfeit Tape

This kind of tape is widely used for safety packaging purposes.

 

It provides visible evidence of tampering or opening, these tapes help to reduce the possibility of theft or unauthorized opening of your valuable goods.

The text which remains on the applied surface could be decided as you want.

Tamper Evident Tape

Security Tapes

The samples are shown in attached pictures.

Should any of these items be of interest to you, please let us know .

We will be happy to give you a quotation upon receipt of your detailed requirements.

Various Colours/Colors

Can be provided in any colour and to custom design print. Can be text or image sent to us in Vector Graphics file (Adobe Illustrator Artwork (AI)).

Polyester Tape, 36 rolls per case = 12Kg per case
(48mm x 50 meter per roll).
Minimum order 10 cases.

ALL OUR PRODUCTS ARE AVAILABLE IN ROLL FORM AND ALSO AS CUSTOM CUT PIECES TO ORDER

 



Contact us by phone, fax, e-mail or , for any adhesive tape requirement

Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk

PRINTABLE PP TAPES

Printer Friendly

PRINTABLE PP TAPES

The best method of printing on PP tapes is by selecting appropriate tapes which have been specially surface treated (Corona treatment). Additionally it requires:

  • Special Printing Inks.
  • Printing Cylinders, which can be heated up to 50 ° C.
  • An extended Drying Tunnel with good ventilation.
  • Printing the tape within 6 months of receipt.


PR International offer the following PP Tapes for printing:

PP Printable Standard
PP Printable Silent Quality
PP Printable Hot Melt

 

Conditions of the printing machine:

  • The best results are obtained when the printing cylinder is heated up:
    50 ° C for PP Standard
    40 ° C for PP Printable Silent Quality
    30 ° C for PP Printable Hot Melt
  • The drying tunnel should have good ventilation and the air temperature has to be between 50 and 60 C, except for the printing of PP Printable Hot Melt where the drying tunnel should not be heated.
  • Ideally the printing should be carried out on printing machines designed for PP Tape printing. For PP Printable Hot Melt it is possible to use a PVC printing machine, provided the printing cylinder can be heated to 30 ° C and has an extended drying tunnel with ventilation and blowing capacity.


Printing Inks:
To-day inks are available which are ready for use, e.g. the PU inks of Supercolor, which are very generally used. If no special inks are available, it is possible to use polyamide inks mixed with isopropylc alcohol and heptane.

Stereos:
Recommend is red Semperit or photopolymer. For PP Printable Hot Melt rubber stereos as used for PVC printing can also be used.

Working procedure:
The print rolls PP Printable Silent Quality should be stored at a temperature of 20 °C to 30 °C. before using them since this makes the unwinding lighter and enables a higher speed on the printing machine.

Where required heat up the printing cylinders. Install the ventilation system and make sure that the air in the drying tunnel has the right temperature. For PP Printable Hot Melt the drying tunnel must not be heated and ventilation has to be at maximum blowing capacity.

Though it is not imperative it is recommend that the tape is cleaned by mounting on the machine a piece of felt which rubs off possible dirty spots.

Adjust the friction of the winding system in order to avoid that the cores will be crushed.

The speed of the machine stays in close connection with the capacity of the ventilation and the drying tunnel.

In case the tape is insufficiently dried a problem with off-setting of the ink may arise. This can be noticed immediately.

The recommended speed of the machine is 80 to 100m. per minute.

In case there is a problem like ink transfer, too high unwinding resistance or tape splitting, this indicates that the drying is insufficient. In this case it is recommend that the speed of the machine be reduced or the performance of the drying tunnel will have to be improved.

To check the print quality, a method generally used is to place a roll in a refrigerator for 15 minutes. By means of a fast unwinding any problem will be noticed. In case there is a problem like ink transfer, too high unwinding resistance or tape splitting, this indicates that the drying is insufficient. In this case it is recommend that the speed of the machine be reduced or the performance of the drying tunnel will have to be improved. The problem may also be resolved by adding to the ink a solvent of isopropylic alcohol and heptane.

 

General Remarks:

During cold periods the inks should be stored at a temperature of 18 ° C to 20 ° C. In case the inks have become solid this can be resolved by immersing the container in a vessel with luke warm water.Before using the ink it has to be stirred thoroughly in order to obtain a perfect mix. Make sure that the containers of ink are well closed in order to avoid evaporation.

At the end of the day the ink which remains in the containers of the machine should be placed back in the original container.During a stop of the production the heating system of the printing cylinder should be disconnected since a too high temperature will create problems with the proper winding of the tape.

Floodcoat printing has to be avoided.



Contact us by phone, fax, e-mail or , for any adhesive tape requirement

Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk

PACKAGING TAPES

 
 
PACKAGING TAPES
Cellulose, Low Static, PVC, PP, Strapping, Anti-Counterfeit Tape and Printed Tapes and Dispensers.

 
Thickness (mm) TOTAL

Thickness (mm)
BASE

Adhesion (n/25mm) Tensile
(n/25mm)
Temperature
(max.° C)
Cellulose Clear – hot melt
1109 0.050 0.031 15 90 60
Features: Easy to handle with low static. High adhesion, release coated for easy unwind
Cellulose Clear – solvent
1101 0.060 0.032 6 90

130

Features: Similiar to cellulose 1109 but with solvent adhesive.

Cellulose Blue Low Static Tape – solvent adhesive
1120 0.045 0.030 5.5 90

130

Features: Transparent. Light Blue, individually wrapped rolls for sealing conductive plastic bags holding electrostatic sensitive devices.
PVC Clear / Brown / White
pvc clear / brown / white 0.055 0.034 5.2 125 60
Features: Strong water resistant packaging tape, also suitable for printing
PVC Coloursred, light blue, dark blue, yellow, green, orange, black
pvc colours 0.058 0.037 5.2 135 60
Features: Suitable for packaging, coding and printing.
PP Clear and Brownhot melt
1252 0.046 0.028 15 100 50
Features: All-round strong water resistant packaging tape with very high adhesion. Easy to unwind
PP Clear / Brown / Whitesolvent
pp clear / brown / white 0.048 0.028 4.5 100 60
Features: Similiar to PP Clear and Brown but with solvent adhesive
PP Strappingorange
1050 0.068 0.050 17.5 400 80
Features: Very strong tape for strapping and bundling. Hot melt adhesive
PP Glassfibre Mono Directional Filament
1010 118 g/m2 15 600 80
Features: Very strong tape for strapping and bundling. Hot melt adhesive.This low cost packaging tape is designed for applications such as coding, identifying, bundling and similar.The red transparent colour of the tape also makes it suitable for some technical applications in the graphics and printing industries.


Dispensers

Desk Dispenser – small
33 meter rolls
25 mm maximum tape width
Desk Dispenser – large
66 meter rolls
25 mm maximum tape width
Bench Dispenser
132 meter rolls
50 mm maximum tape width
Dual Core Dispenser
33 / 66 meter rolls
25 mm maximum tape width
Hand Case Sealer
132 meter rolls
50 mm maximum tape width
Bag Neck Sealer (see below)
66 meter rolls
9 mm maximum tape width

A bag neck sealer is available which applies the tape around the neck of the plastic bag. This dispenser is of strong metal construction and will provide many years of effective service.

Packing: 10 bag neck sealers per case

Bag Neck Sealing Tape

Polyethylene bags are widely used for food packaging, such as vegetables and meat, most commonly employed in retail outlets. It provides a hygienic and airtight presentation.

Tape:
The strong PVC adhesive tape used for sealing these bags are available in a range of colours, for colour coding, and are used in two different dimensions:

Colours:
Red, Blue, Green, Yellow, Orange and Black

Tape Dimensions:
9mm x 66m – 192 rolls per case (most commonly used width)
12mm x 66m – 144 rolls per case



Contact us by phone, fax, e-mail or , for any adhesive tape requirement

Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk

SPLICING TAPES (Single sided)

 
SPLICING TAPES (Single sided)
Based on Cellulose, Polyester and Paper for many web splicing applications, including Casting Papers.

  Thickness (mm) Adhesion (n/25mm ) Tensile ( n/25mm) Temperature (max.° C) Availability
Cellulose Red 1112 0.057 8.0 90 130 short term in stock

Features: Translucent red with a RR adhesive. Suitable for paper and filmic web splicing.Based on a Cellulose film coated with a strong, red rubber/resin adhesive and provided with a release coat for easier unwind.The tape has been specially designed for a variety of splicing applications on many different substrates. In these applications it offers:

  • Good adhesion.
  • Temperature resistance of up to 130 ° C for short periods, or higher temperatures if the web surface temperature remains relatively low.
  • Easy handling since the film is non-static.
  • Red colour for easy identification of the splice.
  • Hand tearable.

Whilst the tape is not designed to adhere to silicone treated surfaces, it is used by some manufacturers of synthetic leather, using this tape as the top splice on casting papers. It would be suitable primarily for PU synthetic leather production where the temperature requirements are generally around 130-150 ° C.

Polyester Silicone 0.068 7.5 100

130 working
180 short term

in stock

Features: For high temperature splicing or siliconised materials

SPLICING TAPES (Double sided)

For overlap splicing refered to Double Sided Tapes



Contact us by phone, fax, e-mail or , for any adhesive tape requirement

Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk

POLYETHYLENE TAPES

 
POLYETHYLENE TAPES
Clear and Black for Sealing, Insulation, Protection and All Weather purposes.

  Thickness (mm) Adhesion (n/25mm) Tensile
(n/25mm)
Temperature
(max.° C)
Availability
PE Clear
2905 0.100 8 40 50 upon order
Features: Ideal for sealing tins and containers. Exceptional moisture restistance and conformability
PE Premium
2901 0.150 9 45

60

upon order

Features: Flexible and waterproof tape with a thermoplastic adhesive. Suitable for splicing and repairing where a conformable tape is required, or for Electrical Insulation. 8 colours including Clear.

PE Black Heavy Duty
2907 0.205 good 60

45

upon order
Features: Extremely conformable, suitable for repairing plastics films. Can be used above and below ground for pipeline protection.
PE Black Low Tack Outdoor
1417 0.112 3.75 40 60 upon order
Features: Outdoor Protection Tape, Highly suitable to protect stainless steel/aluminium for up to 2 years. Resists UV, plaster, paints
PE Clear All Weather
1433 0.150 6 60 70 upon order
Features: Provided with a special UV resistant adhesive. Suitable for many outdoor repairs, especially polyethylene sheetings in tunnel greenhouse.


Contact us by phone, fax, e-mail or , for any adhesive tape requirement

Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk

FOAM TAPES – Sticky Fixers

FOAM TAPES – Sticky Fixers

(For Bonding, Mounting, Fixing, Joining.)

Sticky Fixers 12×25 each pad- 1120 pads- large quantity

Cheapest price guarenteed on the internet. Sellotape branded Sticky Fixers.

Each sheet has 14×4 pads = 56 pads

You receive 20 sheets. Current market price is £20, we sell for half price – £10.00 then £1.50 for P&P

Usefull for many applications. Currently have high stock levels so if you are willing to purchase larger quantities please contact us by email: pr@printernational.co.uk and advise us on your quantity needed.

Telephone: +44 (0)1923-270508

Foam pads coated both sides with a strong adhesive. For permanent mounting and 1120 pads. Gives up to 108g weight loading per pad Pad size: 12x25mm

Sent same day – First class post (as payment is immediate through Paypal, which is invoiced via email)

  • Foam pads coated both sides with a strong adhesive
  • For permanent mounting and display
  • Gives up to 108g weight loading per pad
  • Pad size: 12x25mm
  • Pack Dimensions: 16.6×12.1×7.3cm (LxWxH)
  • Weight: 0.183 k

Current offer:

Large Envelope (20 Sheets) 1120 pads free delivered to anywhere in the United Kingdom – £11.50
1 Box (700 Sheets) 39200 pads free delivered to anywhere in the United Kingdom – £200.00

 



Contact us by phone, fax, e-mail or , for any adhesive tape requirement

Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk

FOAM TAPES – DOUBLE SIDED

 
 
FOAM TAPES – DOUBLE SIDED


  • (Bonding, Mounting, Fixing and Joining applications. Tapes are based on PVC, PE and PU for a wide range of different requirements in terms of temperature, adhesion and shear.)
    Can be supplied in rolls, pads or gaskets.
    Life expectancy: 20 Years

 

Product & Features Colour Thickness (mm) Peel Adh N/25mm Static Shear kg/cm2 Loading g/cm2 Service Temperature
(min – max.° C)
Acrylic Adhesive PVC/Acrylic
5164
high density
White 0.8, 1.5, 3, 4.5 12 0.15 7 -40 / +70
5169
wateseal
Black 0.8,1.5,2,3,4.5 12 0.15 7 -40 / +70
Features: UV resistant, Water Seal, hard closed cell. Used in shoe manufacture and car wing mirrors .
5179
medium density
Black 1.5, 3, 4.5, 6.5 13 0.15 7 -40 / +70
Features: Security Glazing Tape, UV resistant.
5184
pvc/acrylic
White 2, 3 13 0.15 7 +40 / +70
5189
pvc/acrylic
Black 1.5, 3, 4.5, 6.5 13 0.15 7 -40 / +70
Features: High Tack Security Glazing Tape, UV resistant, Amber Liner.
Acrylic Adhesive PE/Acrylic
5464
medium density
White 1, 2 23 0.48 22 -40 / +100
5469 medium density Black 1 23 0.48 22 -40 / +100
Features: Good UV, resists Plasticiser Migration. Suitable for Mirror Mount.
5589
high density
Black 0.8 20 0.3 15 -40 / +100
Features: Good UV, Automotive Application (Badgemount),High Performance Cross-linked PE Foam Petrochemical resistant.
Acrylic Adhesive PU/Acrylic
5669
very high density
Black 0.4, 0.8 19 0.30 15 -40 / +120
Features: Automotive Application (Badgemount), high performance UV resistant PU Foam Highly conformable, excellent chemical resistance.
Rubber Resin Adhesive PE/Rubber resin
5454
low density
White 2, 3 16 0.6 30 -40 / +70
Features: Ideal for irregular surfaces, no UV resistance.
5474 medium density White 1, 2 27 0.8 36 -40 / +70
5479 medium density Black 1 27 0.8 36 -40 / +70
Features: High Shear, No UV. Suitable for Mirror Mount where no UV resitance is required.
5484
medium density
White 1 25 0.30 15 -40 / +70
Features: Low temperature application, extremely aggressive adhesive, no UV resistantance.
5574
high density
White 0.8 45 0.70 36 -40 / +70
Features: High Shear / Foam Strength. No UV

click here for single sided foam tapes.



Contact us by phone, fax, e-mail or , for any adhesive tape requirement

Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk